andy1918@vip.163.com
+8613910927358
Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
The CAT349D main pump is intended for use in a wide range of industrial and commercial applications. In the chemical processing industry, the pump can be used for high temperature, oil-in-water applications, and non-corrosive chemicals. A centrifugal cast iron volute and a cast iron impeller are used in this pump series. The plastic steel base, which can also have a surface gasket, can be installed at the outlet connection of the vertical suction flange or the horizontal drainage flange.
The main pump is the heart of the hydraulic system. It drives hydraulic oil from the reservoir to the internal circulation and from there to each hydraulic circuit. Selection of such components is critical for long-lasting performance and safety.
The CAT349D main pump is designed for a variety of industrial and commercial applications. The pump can be used for high temperature, oil-in-water applications and non-corrosive chemicals in the chemical processing industry. This series of pumps has a centrifugal cast iron volute and a cast iron impeller. The plastic steel base can be installed at the outlet connection of the vertical suction flange or the horizontal drainage flange, and can also have a surface gasket.
The CAT349D main pump is designed to provide optimum performance. It provides reliable performance in demanding, heavy-duty applications requiring precision machining and handling. It features a robust design and a wide range of accessories to perform even in the harshest environments.
The CAT349D main pump is a centrifugal pump driven by a 4-pole AC/DC motor. It is located at the head end of the oilfield fluid conveying system and is used to convey high temperature raw materials and restrain the pressure difference between the inlet and outlet. It can also be used in fields that require high energy consumption, medium pressure ratio, small diameter pipelines, and short-distance gas-gas-wastewater transportation.
One of the main pumps of the CAT349 series, this model has a pump capacity of 10GPM and 1500PSI and can be used as a supply pump. It is installed on the side of the tank and should be installed before any other parts. The compact design eliminates the need for a stand when not in use.
The Cat 349D main pump can be installed in liquid service systems to pump clean water. Designing an open bearing system ensures low bearing wear levels and reduces maintenance requirements.
CAT349D main pump is the most popular main pump in the world, widely used in the main circulation of telecommunication, electric power and hydraulic oil enterprises. Especially the natural gas, chemical and petrochemical industries have strict requirements on pressure and flow. It pumps clean, corrosive and non-corrosive liquids in a pressure range of 100 to 1000 psi and is suitable for high viscosity, viscous and abrasive liquids. It can also be used as a booster pump when connected to a motor. The special advantage of this model is that it has a highly wear-resistant polymer-coated impeller that is resistant to most chemicals. Compared to other main pumps on the market, we offer higher quality and lower prices.
The CAT349D main pump adopts dry bearing and double suction seal, which can keep the pump running when the water level is higher than the suction seal. It also has an integrated vent that prevents oil from flowing back into the suction line, ensuring long-term operation of the suction seal. For extra protection, wear rings are used on the inside of the pump casing and spiral wear rings on the outside. This allows the pump model to be used at depths of 800 meters (2625 feet).
CAT349D main pump is used in power plants, water treatment plants, gas stations. Our pumps are popular in markets all over the world. We can design any type of pump according to customer's requirements.
We are a professional manufacturer and supplier of hydraulic pumps for excavators, specializing in R&D and production of high quality excavator parts, especially hydraulic pumps. We have long-term cooperation with SANY, 360 and 385 ordinary KMX32NA dealers. For example. Excavator hydraulic pump, etc. Our products are mainly exported to Europe (UK, France, Germany, etc.). ).), North America (Americas) and South Africa; they enjoy a good reputation among customers for high quality and favorable prices. For example, our products are widely used in the Chinese market and other countries. South America, Southeast Asia, Africa, etc. We hope to be one of your most valuable suppliers with high quality products and services!
